In this figure shows the compatibility IOS release, indicating integrated version of CUCM, CUCM GUI version (WEB) available to install and technical specifications.
Therefore, when downloading the package mentioned in the image x, we must keep this list so that all the functions to be implemented to run without any problems.
Now, if you want to download some of these files can be done separately from the Internet address where you can view http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240 all files related to software, telephones, and other applications from a single browser window, as shown in Figure:
From this menu you can select the phone available in this case, 7940G, and download utilities, software and firmware SIP / SCCP, among others, as shown in Figure:
In this case, it will download the package "cmterm-7940-7960-sccp.8-0-10.zip "which contains the firmware files required for SCCP IP phone 7940G.
The package contains the following files:
- P00308001000.bin
- P00308001000.loads
- P00308001000.sb2
- P00308001000.sbn
Everyone should go to Flash using TFTP.
Since both routers are available in a version 22T IOS Early Deployment "will download an additional package" cme-124-20T1.zip "from which we can mention the following files:
- 7970-backgrounds.tar: Wallpapers for mobile IP.
- cme-gui-7.0.0.1.tar: Web interface management CUCM.
- ringtone.tar: Set additional ringtones.
- music-on-hold.au: Sound audio waiting for calls between the PSTN and the local network.
- cme-BACD-2.1.2.2.tar: sound files for IVR.
For now be uploaded to the flash packages "Cme-gui-7.0.0.1.tar" and "music-on-hold.au" recalling that to unzip the package. Tar to proceed with the command "archive tar / Xtract tftp: / / xxxx / cme-gui- 7.0.0.1.tar flash: ".
kyrios
0 comments:
Post a Comment